SEL Digital Selector Block

The Digital selector block (SEL) allows an digital value to select one of two digital input values.

Analog SEL definition parameters

Parameter Description
Name Function block name, see common parameters
DYN dynamic option, see common parameters
/ Mixed inputs option, see common parameters



The two digital values from which the selection is done. 
Selector Input When (Low) the A input is used to drive the output value. When (High)  the B input is used to drive the output value. If the input is not define (i.e. set to DYN and "none" selected) the output is not driven and it is possible to set the output value directly, via MBus_ioFlash, Modbus, or on the device itself.
/ Normal/Invert output option, see common parameters